UNDERWATER PRESSURE SENSOR (0-5000 PSI)

SKU: 1-09-08

Tourmaline ICP omnidirectional underwater blast sensor measures shock wave pressures associated with underwater explosion testing, 19.3 cm (7.6 in.) length with 61 m (200 ft.) of 038 water tight cable terminating in a BNC plug. The sensor is structured with a volumetrically sensitive tourmaline crystal, suspended and sealed in an insulating, oil-filled vinyl tube. It has integral microelectronics. This underwater shock wave sensor provides a clean, non-resonant high-voltage output through long cables in adverse underwater environments. It contains a weight attachment hole to suspend the sensor in water at a given depth. Compatible with MREL’s DataTrap II™ Data/VOD Recorder (Product 1-04-01) and MicroTrap™ VOD/Data Recorder (Product 1-03-01) containing the optional MicroTrap™ Scope Upgrade (Product 1-03-03). Requires excitation power from Product 1-11-03A. Sensors with other maximum pressure levels are available, contact MREL for more information. The sale of this item is controlled by federal authorities – export approval must be obtained by MREL for all Customers.

ДОПОЛНИТЕЛЬНЫЕ ДЕТАЛИ

ТЕХНИЧЕСКИЕ ХАРАКТЕРИСТИКИ

	English:	SI:
Performance
Measurement Range (for ±5V output)	5000 psi	34475 kPa
Useful Overrange (for ± 10V output) [3]	10000 psi	68950 kPa
Sensitivity (±15 %)	1.0 mV/psi	0.15 mV/kPa
Maximum Pressure	50000 psi	344750 kPa
Resolution [2]	0.1 psi	0.7 kPa
Resonant Frequency	≥1000 kHz	≥1000 kHz
Rise Time (Reflected)	≤1.5 µ sec	≤1.5 µ sec
Low Frequency Response (-5 %)	1.7 Hz	1.7 Hz
Non-Linearity [1]	≤2.0 % FS	≤2.0 % FS
Environmental
Temperature Range (Operating)	-10 to +100 °F	-23 to +37.8 °C
Maximum Shock	20000 g pk	196140 m/s² pk
Electrical
Output Polarity (Positive Pressure)	Positive	Positive
Discharge Time Constant (at room temp)	≥0.3 sec	≥0.3 sec
Excitation Voltage	20 to 30 VDC	20 to 30 VDC
Constant Current Excitation	2 to 20 mA	2 to 20 mA
Output Impedance	≤100 Ohm	≤100 Ohm
Output Bias Voltage	8 to 14 VDC	8 to 14 VDC
Physical
Sensing Element	Tourmaline	Tourmaline
Housing Material	Stainless Steel	Stainless Steel
Electrical Connector	10-32 Coaxial Jack	10-32 Coaxial Jack
Weight	0.75 oz	21.0 gm

* All specifications are at room temperature unless otherwise specified.

[1] Zero-based, least-squares, straight line method.
[2] Typical.
[3] For +10 volt output, minimum 24 VDC supply voltage required. Negative 10 volt output may be limited by output bias.