Rugged, Portable and Easy to Use

The PWT™ Portable Wireless Trigger is a small and compact and easy to use remote triggering system. This unit has been tested and performs perfectly in a rugged mining environment. The PWT™ Portable Wireless Trigger will allow the camera to be positioned in the best location and angle for the information to be recorded without the worry of positioning an operator next to the camera. This will allow the operator to be positioned up to 500 metres (1640 ft.) away from the camera while still operating the unit as if they are standing right beside it.

PWT™ Portable Wireless Trigger Image






Multiple Input and Output Trigger options

The PWT™ Portable Wireless Trigger has four inputs and outputs available to connect to each transmitter and receiver. The Normally Open Circuit will allow the standard push button trigger, the Normally Closed Circuit will allow a wire to be broken, TTL Falling and Rising allows a proper TTL signal to trigger the unit. Another advantage is the input trigger to the transmitter does not need to be the same as the output trigger from the receiver. This will allow the operator to use any input trigger signal and connect it to a high speed camera which usually requires Normally Open Circuit.

PWT™ Portable Wireless Trigger Image


Trigger Multiple Cameras at one time

One transmitter has the ability to communicate with up to four receivers at a distance of up to 500 metres (1640 ft.). This will give the operator the ability to trigger 4 cameras with a simultaneous trigger point. This will give the operator to capture multiple angles using multiple cameras without the requirement of more people. For more information, click here.

For use in concert with the following:

Ranger II™ Lt High Speed Camera Logo

Ranger II™ High Speed Camera Logo

PWT™ Portable Wireless Trigger Image


Accessories Icon

Accessories

PWT™ Portable Wireless Trigger Additional Receiver:
PWT™ Receiver which is programmed and serialized to match an existing PWT™ Transmitter. A maximum of four PWT™ Receivers can be matched to one PWT™ Transmitter. Supplied with PWT™ Tripod, 120 or 230 VAC Battery Charger, 6 VDC Battery Adapter, RG-58/U coaxial patch cable, and padded carry case.